You are here:Home»Services»Monitoring of pipelines»Inclinometer probe

Inclinometer probe

The inclinometer probe measures tilt deviations within the vertical inclinometer casings. This allows the monitoring of lateral movements. Inclinometer probe model S242SV30 is equipped with a ±300 range biaxial, force-balanced servo accelerometer which provides a high level of precision, durability and quick response. Sisgeo inclinometer probes can be used in conjuction with all commercially available inclinometer casings with ID grooves from 38 mm to 84 mm. A durable anti-shock plastic ABS carrying case is provided for transportation and storage of inclinometer probed as well as the dummy probe. Readings are obtained by Archimede portable datalogger...

Technical specifications

Measuring probe    ±30C ±15C and ±90C option
Non-linearity + hysteresis    0.02% FS 0.06% FS for ±90 probe
Repeatability    0.01% FS
Temp. Operating range    -20C +70C system
Accuracy    ±4mm per 30meter (with Archimede readout)
Wheel base    500mm (metric) 2-foor (English)
Diameter    28 mm
Length    750mm (without connector)
Wheel diameter    32mm

Equipped with uniaxial solid-state accelerometer this probe is designed for measurements in horizontally-installed inclinometer tubes.
Measuring range    ±300
Repeatability     0.05% FS
Diameter     28mm
length    750mm (without connector)

The spiral Probe is used to define the real azimuth of the inclinometer casing after installation. It provides measurements that can be used to correct the data obtained from twisted inclinometer tubes. The spiral probe is fully compatible with the inclinometer operating cable and Archimede datalogger.
Measuring range    ±50 over the probe length
Resolution     10 mV/0
Accuracy     ˂0.5% FS
Diameter     28mm
Length    1.263mm (without connector)а)

Read 1120 times
More in this category: « Fixed extensometers


The Republic of Kazakhstan, Nur-Sultan
st. Syganak, 10/2, office 142

Phone: +7 [7172} 456-407
Еmail: This email address is being protected from spambots. You need JavaScript enabled to view it.